At this stage, with the rapid development of breaker manufacturers, the application of breaker has played an important role in the rapid development of buildings. Breaker accessories are an important condition to ensure the good operation of equipment, and breaker accessories have breaker guide sleeves. Breaking hammer body bolts, breaking hammer short bolts, breaking hammer aprons, breaking hammer sealing ring repair kits, breaking hammer flat pins, breaking hammer round pins, breaking hammer pistons and other parts, the spare parts should be checked regularly during use. Let's see what aspects need to be checked.
1. Detect and replace the body bolts. In use, be sure to release all the air inside. Otherwise, when the body bolts are removed, the upper body will pop out, causing consequences.
2. After all the breakers are cleaned, check if there is any damaged area.
3. When assembling the body bolts, it must be tightened slowly, and it cannot be rotated to a tight state immediately.
4. The torque wrench should be selected in a specific category.
5. Inspect and replace seals.
Be sure to pay attention: as long as the breaker is found to leak, the seal must be replaced. If there is any problem with the seal, it should be handled properly. The way to replace the seal is to apply a layer of oil to the seal and the place where it is placed.
