In fact, the straight splint of the breaker is of great significance to the large breaker. It determines the overall damage status of the hydraulic breaker during work. So what role does it have? The straight splint of the breaker has a great impact on the hydraulic breaker. The key is to play a fixed role. In order to avoid the resonance of the breaking hammer during strong movement.
The so-called resonance refers to the principle that when an object moves at the same frequency as other objects, it will also resonate. Resonance is a dangerous hazard for the breaker. If it is in a strong movement, a component of the breaker will produce If it is loose, it may cause resonance with other parts, which will cause damage to the breaker. The straight splint of the breaker can fix the parts of the breaker, so that the parts can work well , so as to prevent the occurrence of the resonance principle. The operator also needs to pay attention to whether the straight splint of the breaker is loose, and if it is loose, it must be dealt with immediately to avoid damage to the entire breaker.
I believe that many breaker users will occasionally find that the hydraulic oil of the hydraulic breaker leaks and the shell of the breaker is severely corroded. That is because it cannot be used for a long time, or the form of storage is wrong, which causes the main cause of water erosion. Rust can cause the piston to Contusion damage to the seals, resulting in hydraulic oil leakage.
Breaking hammer is here to remind again carefully, the form of long-term storage of hydraulic breaking hammer: drain the N2, and put the steel drill on it, and the first section of the upper cylinder is much higher than the bottom.
There is a small problem that when using it, there are many digging actions, and a large amount of small gravel enters the shell of the breaker, which causes damage to the piston seal, and then causes serious oil leakage. The customer chooses the correct operation method Carry out excavation to prevent this from happening.
Let’s talk about the small problem about the shell of the breaker that cannot be ignored. Generally speaking, the equipment is bought with hard-earned money, so it must be maintained carefully, so that the cost can be recycled as soon as possible and more profits can be brought. .
